Pad Printing Silicon Rubber Usages:
Pad printing silicone rubber is mainly use for printing irregular
patterns on plastic toys, shampoo, pen, glass ,electroplating toys
and trade makers and so on .
Pad Printing Silicon Rubber description
Pad printing silicone rubber as a carrier which transfer patterns
on the steel plate to the toys products surface.
Pad Printing Silicon Rubber Features:
1) High print times
2) abrasion resistance.
3) Good printing effects
4) Permanent and durable
Pad Printing Silicon Rubber Operation Instructions:
Step One: Take 100g of part A and add 2g of part B and mix the
silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3—5 minutes
,otherwise, once the silicone rubber has cross-link reaction during
vacuum pumping process, it will not be operated.
Step Three: Pouring the vacuumed mixture into the original mold
slowly,when it turns dry,you can take the product out,then the mold
Shelf life for Pad Printing Silicon Rubber
8~10months, when stored in a dry & cool place under the room
Packing for Pad Printing Silicon Rubber
20kgs/drum vacuumed packing
For further information, pls contact with Mr. Samuel
Mail : samuelsilicone(at)gmail(dot)com
Welcome to visit www (dot)szrl (dot)net anytime .